Advertisement
Quick Links
Thank you for your Unger purchase!
Let's get started!
WATER
IN
Connect the included connectors and hose to water source
1
Connect water source hose to inlet connection at the bottom of unit
2
WATER
OUT
Connect garden hose and connectors to outlet connection at top of unit
3
Connect the Soap Blasting Nozzle and start flow of water through the system,
4
you are now ready to wash your vehicle!
DO NOT REMOVE RESIN FROM NYLON BAG
QUICK-START
™
Can cause severe injury or death from tank rupture.
This Quick-Start User Guide is not a substitute for reading
the User Manual. To reduce the risk of injury or death, user
must read and understand the User Manual before using
this product. This product is not intended for commercial
use. It is intended for residential application only.
WATER
1
WATER
OUT
3
GUIDE
READ THIS FIRST
Contents under pressure.
IN
2
4
Advertisement
Related Manuals for unGer RINSE 'N' GO PLUS
Summary of Contents for unGer RINSE 'N' GO PLUS
- Page 1 Thank you for your Unger purchase! QUICK-START GUIDE ™ READ THIS FIRST Contents under pressure. Can cause severe injury or death from tank rupture. This Quick-Start User Guide is not a substitute for reading the User Manual. To reduce the risk of injury or death, user must read and understand the User Manual before using this product.
- Page 2 Unger recommends washing your car in the shade. Washing your car under the hot sun will cause the soap to dry fast and potentially settle on the car. If this can’t be avoided, be sure to keep the soap areas wet until ready to rinse it off.