Audio - Axis M30 Series User Manual

AXIS M30 Network Camera Series
Configure your device
10. Click Save.
Create a rule:
11. Go to System > Events > Rules and add a rule.
12. Type a name for the rule.
13. In the list of conditions, under Video, select Tampering.
14. In the list of actions, under Notifications, select Send notification to email and then select the recipient from the list.
15. Type a subject and a message for the email.
16. Click Save.

Audio

Add audio to your recording
1. Go to Video > Stream > Audio and include audio.
2. If the device has more than one input source, select the correct one in Source.
3. Go to Audio > Device settings and turn on the correct input source.
4. If you make any changes to the input source, click Activate changes.
5. Edit the stream profile that is used for the recording:
5.1 Go to System > Stream profiles and select the stream profile.
5.2 Select Include audio and turn it on.
5.3 Click Save.
Add audio capability to your product
With the AXIS T61 Audio and I/O Interface products, you can add audio capability to your product. Use the setup in, for example,
interview rooms. You can place the Axis network video product on the wall or ceiling to give good visual coverage, and the
AXIS T61 Audio and I/O Interface on or above the interview table.
14