Table of Contents
Advertisement
Certification
6.1.2 ATEX/IEC Ex
•
The device is marked with a CSA symbol that indicates compliance with both
Canadian and U.S. requirements.
C
Copies of the CSA Declarations of Conformity are available via Siemens Industry
Online Support:
•
•
6.1.2
ATEX/IEC Ex
This device meets the requirements of the following ATEX/IEC Ex standards:
•
It is specifically approved for use in hazardous locations defined as:
•
•
•
6.1.3
European Union (EU)
This device is declared by Siemens AG to comply with essential requirements and
other relevant provisions of the following EU directives:
•
•
•
24
ANSI/ISA-12.12.01-2007
Non-incendive Electrical Equipment For Use In Class 1 And 2, Division 2 And Class
3, Divisions 1 And 2 Hazardous (classified) Locations
US
https://support.industry.siemens.com/cs/ww/en/view/109476357
Safety)
https://support.industry.siemens.com/cs/ww/en/view/109476358
Locations)
IEC/EN 60079-15:2005
Electrical Apparatus for Explosive Gas Atmospheres - Part 15: Construction, Test
and Marking of Type of Protection "N" Electrical Apparatus
EEx nC IIC T4
Ex II 3 G
12-24 VDC, 2A, Class III
EN 61000-6-2
Electromagnetic Compatibility (EMC) – Part 6-2: Generic Standards – Immunity
for Industrial Environments
EN 60825-1
Safety of Laser Products – Equipment Classification and Requirements
EN 50581
Technical Documentation for the Assessment of Electrical and Electronic
Products with Respect to the Restriction of Hazardous Substances
(General
(Hazardous
RUGGEDCOM i801
Installation Manual, 01/2021, C79000-G8976-1003-06
Advertisement
Table of Contents
