Installation
The air inlet and outlet vent should be far from the obstruction, make sure that the air
1.
can be blown through the whole room.
2.
Select a position where the condensing water can be easily drained out, and the place
is easily connected for outdoor unit.
3.
Select a location where the children can not reach.
4.
Can select the place where is strong enough to withstand the full weight and vibration of
the unit. And will not increase the noise.
5.
Be sure to leave enough space to allow access for routine maintenance. The height of the
installed location should be
6.
Select a place about
7.
Select a place where the filter can be easily taken out.
8.
Make sure that the indoor unit installation should accord with installation dimension
diagram requirements.
9
.
Do not use the unit in the immediate surroundings of a laundry a bath a shower or a
swimming pool.
1 .
Select a location from which noise and outflow air emitted by unit will not inconvenience
neighbors, animals, plants.
2 .
Select a location where there should be sufficient ventilation.
3 .
Select a location where there should be no obstructions cover the inlet and outlet vent.
4 .
The location should be able to withstand the full weight and vibration of the outdoor unit
and permit safe installation.
5 .
Select a dry place, but do not expose under the direct sunlight or strong wind.
6 .
Make sure that the outdoor unit installation dimension
dimension diagram, convenient for maintenance, repair.
The height difference of connecting the tubing within
7.
tubing within
33 ft
8.
Select a place where it is out of reach for the children.
9.
Select a place where will not block the passage and do not influence the city appearance.
Important Notices
Indoor Unit
or more from the floor.
8 ft
or more away from TVset or any other electric appliances.
3 ft
Outdoor Unit
.
Placement
Placement
are in accordance
, the length of connecting the
16 ft
16
with installation