To Clear All Error Code; To Exit From Self-Diagnostic Function - Panasonic SA-AK630E Service Manual

wait until the tray is open.
5. Press
6. Press
7. Press "
- If several problem exist, error code will change each time

12.5. To clear all Error code

1. Press
2. FL indicator shows "CLEAR" for 1 second and change to "T".

12.6. To exit from Self-Diagnostic function

1. Press
12.7. Power Amplifier Failure (F61)
1. When power amplifier fail, F61 will indicate automatically.
12.8. Description of Error Code
12.8.1. Abnormality detection for Deck Mechanism block
No.
1
2
3
4
12.8.2. Abnormality detection for CD/Changer block
PDF created with pdfFactory Pro trial version
/STOP" to indicate Error Code.
when " /STOP" is pressed. (e.g. F15
Abnormal Items
MODE SW abnormal
REC INH SW abnormal
HALF SW abnormal
Reel pulse abnormal
and remove the CD.
to close the tray.
and hold button for 5 seconds.
button on main unit or remote control.
Error Method of Detection
Display
H01 Normal operation during mecha transition, MODE
abnormal is memorized. The content of abnormality
can be confirmed in the abnormal detection mode
explained in the later section.
H02 The content of abnormality can be confirmed in
abnormal detection mode explained in the later
H03 The content of abnormality can be confirmed in
abnormal detection mode explained in the later
F01 The content of abnormality can be confirmed in
abnormal detection mode explained in the later
68
www.pdffactory.com
F26 F16 ....etc).