Clearance To Combustibles; Overall Dimensions - USSC USG295SS Owner’s Instruction And Operation Manual

WARNING:
• DO NOT UNPLUG THE GRILL IF YOU SUSPECT A
MALFUNCTION. TURN THE "ON/OFF" SWITCH
TO "OFF" AND CONTACT YOUR DEALER.
• DISCONNECT THE POWER CORD BEFORE
PERFORMING ANY
TURNING THE "ON/OFF" SWITCH TO "OFF"
DOES NOT DISCONNECT ALL POWER TO THE
ELECTRICAL COMPONENTS OF THE GRILL.
• A POWER SURGE PROTECTOR IS REQUIRED.
THIS UNIT MUST BE PLUGGED INTO A 110 -
120V, 60 HZ GROUNDED ELECTRICAL OUTLET.
DO NOT USE AN ADAPTER PLUG OR SEVER
THE GROUNDING PLUG. DO NOT ROUTE THE
ELECTRICAL CORD UNDERNEATH, IN FRONT
OF, OR OVER THE GRILL. DO NOT ROUTE THE
CORD IN FOOT TRAFFIC AREAS OR PINCH THE
CORD UNDER ANY OBJECT.
WARNING:
THIS PELLET GRILL MUST BE INSTALLED WITH
THE CLEARANCE TO COMBUSTIBLES AS SHOWN
IN THIS MANUAL. WARNING: DO NOT OPERATE
THIS GRILL UNDER A CEILING OR OVERHANG.
WARNING:
OPERATE YOUR PELLET GRILL ONLY ON A
NONCOMBUSTIBLE FLOOR OR PROVIDE FLOOR
PROTECTION ADEQUATE TO PROVIDE EMBER
PROTECTION AROUND GRILL.
12"
© 2021 United States Stove Company

CLEARANCE TO COMBUSTIBLES

MAINTENANCE! NOTE:

OVERALL DIMENSIONS

24"
12"
WARNING:
• UNPLUG THE GRILL WHEN NOT IN USE.
• THE GRILL WILL NOT OPERATE DURING
A POWER OUTAGE. IF A POWER OUTAGE
DOES OCCUR, CHECK FOR UNSAFE BURN
CONDITIONS THAT MIGHT HAVE OCCURRED.
• THE MOVING PARTS OF THIS GRILL ARE
PROPELLED BY HIGH TORQUE ELECTRIC
MOTORS. KEEP ALL BODY PARTS AWAY FROM
THE AUGER WHILE THE GRILL IS PLUGGED
INTO AN ELECTRICAL OUTLET. THESE MOVING
PARTS MAY BEGIN TO MOVE AT ANY TIME
WHILE THE GRILL IS PLUGGED IN.
SAVE THESE INSTRUCTION
24-11/16"
15"
4