Page 1
OW NE R’S M ANUAL IN STA LL ATION GUIDE BENE 10FE Hous ehold Inst ant G as Wate r He ate r Please read this manual carefully before using the product.
Dear users, Thank you for selecting Rubine gas instantaneous water heater for your home. We are confident you will be satisfied with the performance of this water heater as it is designed and produced in accordance with the national standard.
FEATURES & BENEFITS This gas water heater is an instant heater with gas as fuel. It can provide hot water continuously and conve- niently for shower, washing and other cleaning. Forced Exhaust Type Forced exhaust type takes the indoor air for combustion and uses exhaust pipes and fans to forcedly exhaust the gas out of the bathroom.
Place above the gas water heater Decorating Plate For gas water heater III. TECHNICAL PARAMETER Model BENE 10FE Rated heat load (kW) Minimum rated heat load (kW) Rated hot water supply (T 11 ∆ C) (kg/min) Using type of gas...
STRUCTURE & DIMENSION (Measurement in mm) Crown Display Black Base There may be structure modifications. Please refer to the real objects. The structure is subject to modification without notices.
INSTALLATION The installation and maintenance have to be carried out by qualified professionals, or RUBINE authorised technicians. Do not install the product by yourself at will, for improper installation may cause accident. Please refer to installation requirements and method. The gas water heater is not allow to operate without installing the crown provided or exhaust pipe (sold separately).
INSTALLATION STEPS Step 1 • Drill the top and bottom holes for the gas water Drill a hole with diameter of heater according to the measurement as shown on 8mm, depth 50mm and fix the expansion bolts provided. Fig 2. •...
Page 8
INSTALLATION OF EXHAUST PIPE (OPTIONAL) This product is a forced exhaust gas water heater hence in any case you prefer to install the exhaust pipe rather then the crown, you may purchase it separately. The exhaust pipe should be connected at outdoor. •...
VII. OPERATION METHOD Please check that the gas water heater is and connection parts are installed correctly. After inspection, please carry out the procedures as followed. 1. Please turn on the water 2. Turn the mixer to hot 3. Connect the power plug 4.
VIII. DISPLAY FUNCTION Temperature Setting and Error Code Display • When turned on, it will show the last setting temperature. • For temperature display, the digital will not flick. • For error code, the digital will flicker. Flame Indicator Child Lock •...
SAFETY WARNING • Make sure the ventilation is good when using the gas water heater. • Do not install the gas water heater outside with exposure to rain to avoid broken down. • Check the exhaust pipe frequently to avoid jam. It will lead to CO poison if the waste gas could not go outside.
MAINTENANCE • Please check and maintain the gas water heater frequently for safety use. • Turn off the gas valve and water valve, unplug the power and let the gas water heater cool first before maintenance. • There are some electronic components inside the gas water heater, hence never let the water immerse inside the heater.
TROUBLESHOOTING Phenomena below are not faults. Phenomena Reason and Solutions It takes a while to get the hot water from the heater When the mixer is turned on, the system will drain after turning on the hot water tap. out the cold water remaining in the pipe between the heater and hot water tap.
Page 14
Fault Code The error code will flash on the LED screen. Below are the possible solutions to the respective faults. Error Errors Solutions Code Turn off the main power supply and turn it on The inlet water temperature sensor fault. again.
Need help?
Do you have a question about the BENE 10FE and is the answer not in the manual?
Questions and answers