Daikin Altherma 3 R F Installer's Reference Manual page 286

10/12
Field settings table
Breadcrumb Field code Setting name
9.I [7-0C] Time needed by the mixing valve to turn from one side to the other, in case a
bizone kit is installed.
9.I [7-0D] --
9.I [7-0E] --
9.I [8-00] Minimum running time for domestic hot water operation.
9.I [8-01] Maximum running time for domestic hot water operation.
9.I [8-02] Anti-recycling time.
9.I [8-03] --
9.I [8-04] Additional running time for the maximum running time.
9.I [8-05] Allow modulation of the LWT to control the room temp?
9.I [8-06] Leaving water temperature maximum modulation.
9.I [8-07] What is the desired comfort main LWT in cooling?
9.I [8-08] What is the desired eco main LWT in cooling?
9.I [8-09] What is the desired comfort main LWT in heating?
9.I [8-0A] What is the desired eco main LWT in heating?
9.I [8-0B] --
9.I [8-0C] --
9.I [8-0D] --
9.I [9-00] What is the maximum desired LWT for main zone in heating?
9.I [9-01] What is the mimimum desired LWT for main zone in heating?
9.I [9-02] What is the maximum desired LWT for main zone in cooling?
9.I [9-03] What is the mimimum desired LWT for main zone in cooling?
9.I [9-04] Leaving water temperature overshoot temperature.
9.I [9-05] What is the mimimum desired LWT for add. zone in heating?
9.I [9-06] What is the maximum desired LWT for add. zone in heating?
9.I [9-07] What is the mimimum desired LWT for add. zone in cooling?
9.I [9-08] What is the maximum desired LWT for add. zone in cooling?
9.I [9-09] What is the allowed undershoot in cooling?
9.I [9-0A] What is the room buffering temperature in heating?
9.I [9-0B] What is the room buffering temperature in Cooling?
9.I [9-0C] Room temperature hysteresis.
9.I [9-0D] Pump speed limitation additional zone
9.I [9-0E] Pump speed limitation main zone
9.I [C-00] --
9.I [C-01] --
9.I [C-02] Is an external backup heat source connected?
9.I [C-03] Bivalent activation temperature.
9.I [C-04] Bivalent hysteresis temperature.
9.I [C-05] What is the thermo request contact type for the main zone?
9.I [C-06] What is the thermo request contact type for the add. zone?
9.I [C-07] What is the unit control method in space operation?
9.I [C-08] Which type of external sensor is installed?
9.I [C-09] What is the required alarm output contact type?
9.I [C-0A] --
9.I [C-0B] --
9.I [C-0C] --
9.I [C-0D] --
4P655202-1 - 2021.09
Range, step
Default value
R/W 20~300 seconds, step 5 sec
125 seconds
4
7
R/O 0~20 min, step 1 min
1 min
R/W 5~95 min, step: 5 min
30 min
R/W 0~10 hour, step: 0,5 hour
3 hour
50
R/W 0~95 min, step: 5 min
95 min
R/W 0: No
1: Yes
R/W 0~10°C, step: 1°C
5°C
R/W [9-03]~[9-02], step: 1°C
18°C
R/W [9-03]~[9-02], step: 1°C
20°C
R/W [9-01]~[9-00], step: 1°C
35°C
R/W [9-01]~[9-00], step: 1°C
33°C
13
10
16
R/W [2-0C]=2:
37~60, step: 1°C
60°C
[2-0C]≠2:
37~55, step: 1°C
55°C
R/W 15~37°C, step: 1°C
25°C
R/W 18~22°C, step: 1°C
22°C
R/W 5~18°C, step: 1°C
7°C
R/W 1~4°C, step: 1°C
2°C
R/W 15~37°C, step: 1°C
25°C
R/W [2-0D]=2:
37~60, step: 1°C
60°C
[2-0D]≠2:
37~55, step: 1°C
55°C
R/W 5~18°C, step: 1°C
7°C
R/W 18~22°C, step: 1°C
22°C
R/W 1~18°C, step: 1°C
18°C
R/W [3-07]～[3-06]°C, step: 0,5°C
23°C
R/W [3-09]～[3-08]°C, step: 0,5°C
23°C
R/W 1~6°C, step: 0,5°C
1 °C
R/W 0~8, step:1
0: No limitation
1~4: 90~60% pump speed
5~8: 90~60% pump speed during
sampling
6 80% pump speed during sampling
R/W 0~8, step:1
0: No limitation
1~4: 90~60% pump speed
5~8: 90~60% pump speed during
sampling
6 80% pump speed during sampling
1
0
R/W
0: No
1: Bivalent through header
R/W -25~25°C, step: 1°C
0°C
R/W 2~10°C, step 1°C
3°C
R/W 0: MMI requests (incl. quick logic)
1: 1 contact
2: 2 contacts
R/W 0: MMI requests (incl. quick logic)
1: 1 contact
2: 2 contacts
R/W
0: LWT control
1: Ext RT control
2: RT control
R/W
0: No
1: Outdoor sensor
2: Room sensor
R/W 0: Normally open
1: Normally closed
0
0
0
0
Installer setting at variance with
default value
Date Value
(*1) *6V_(*2) *9W_
(*3) *18*_(*4) *23*_
(*5) + EKHVCONV4