Precautions For A Stand Installation - Sharp PN-CD701 Installation Manuallines

5. Precautions for a stand installation

NOTE : Optional stand has NOT been set for PN-CD701. The stand described in chapter 5 is using only
for explanation.
Recommended working space
We recommend to secure the following space to install the display and the stand.
(Recommended working space considering unpacking and clean up)
Working space
Stand installation place
The space shown on the right is necessary to install the stand.
(Sufficient clearance space of the display will be secured when installing
the display on the stand)
The stand must be placed on the flat floor.
Confidential
Width Depth
> 5,300mm > 2,400mm
Copyright © All rights reserved, SHARP CORPORATION
Width
70" type >1,800mm >1,200mm
*When installing at maximum height
Stand mounting bracket
Depth Height
*
>2,300mm
7