Fujitsu FSC B17-1 Service Manual page 9

Setting the horizontal position of the OSD menu
OSD
H-Position
With this function you move the OSD menu to the left or to the right.
Setting the vertical position of the OSD menu
OSD
V-Position
With this function you move the OSD menu up or down.
Setting the display duration of the OSD menu
OSD
Timeout
With this function you select a value from 10 to 120 seconds.
If the set time expires without a setting being made, the OSD menu is
automatically faded out.
Setting the display format of the OSD menu
OSD
Rotation
With this function you switch the OSD menu from portrait mode to landscape
mode and vice versa.
O = the OSD Menu is displayed in portrait mode
ff
= the OSD Menu is displayed in landscape mode
O
n
Setting functions in the "Advanced " menu
Calling the
Selecting input signal
Input select
With this function you switch the screen from the analogue to the digital mode
and vice versa.
The condition is that the graphic card used supports this function.
Displaying monitor data
Resolution
Notifier
The optimum resolution for this monitor is 1280 x 1024pixels. With the function
activated
(On)
different resolution is set.
Change the resolution to 1280 x 1024 to achieve optimum picture quality.
With the function deactivated
Activating the factory settings
Factory Recall
With this function all settings are reset to the factory settings without prompting
for confirmation.
The
Auto Processing
Displaying information
Calling the
With this function the model designation, serial number,
resolution, H/V frequency, input signal and polarity of the
synchronisation signal are displayed.
All manuals and user guides at all-guides.com
setting window
Advanced
, a message appears on the screen after approx. 30 seconds if a
no message appears.
(Off),
message is displayed.
setting window
Information
9
FSC B17-1 Service Manual