CW-C4000 Series
User's Guide
OT-PT40
OT-PT40 is an paper ejection tray that allows you to temporarily collect printed labels.
OT-PT40 can hold the paper of the following sizes.
Maximum paper size: 105 x 148 mm (width x length)
Minimum paper size: 76 x 54 mm (width x length)
Note
❏
❏
Attach the tray by following the steps below.
A
Attach the tray by hooking it onto the hooks on the under side of the paper ejection guides.
B
Pull the lever at the bottom right of the OT-PT40 to release the lock.
Appendix
In the case of roll paper, the paper is curled so if multiple labels or sheets are printed and ejected,
they may overflow the tray.
Depending on the printer model, OT-PT40 comes with the printer.
84