PRESONUS Revelator Dynamic Owner's Manual page 82

1. Tune: Adjusts the pitch of the affected signal from high to low.
2. Damping: Adjusts the amount of high-frequency content sent through feedback (4.) in the affected
signal.
3. Wet/Dry: Blends the affected ("wet") sound with the un-affected, ("dry") sound of your voice. Set to
100% to only hear only the processed sound. Set to 0% to only head the dry sound.
4. Feedback: Adjusts length of echo effect.
5. Distortion: Add some grit and edge to the affected sound, like an overdriven guitar ampllifier.
Delay
A delay essentially creates an echo, although you can often use delays to create more complex time-
based effects. The source signal is delayed so that it is heard later than it actually occurred.
7.2.7 Voice FX 82