PRESONUS Revelator Dynamic Owner's Manual page 76

Standard EQ
1. On/Off. Turns the EQ on or off in the signal chain.
2. Frequency. This control sets the center frequency at which signals are boosted or cut for the cur-
rently selected band.
3. Gain. Sets the amount by which the selected frequency will be boosted or cut.
4. Q. Sets the Q (or width) of the current EQ band. Larger Q values affect a narrower range of fre-
quencies. Lower Q values affect a wider range.
5. Low Shelf On/Off. Enables/disables the low shelf EQ. When the Shelf button is not engaged, the
Low band is parametric. Enabling the Shelf button turns the Low band into a low-shelving EQ that
alters, by a fixed amount, a band of low frequencies at and below a user-selected shelving frequency.
Power User Tip: A low shelving EQ is like a bass-control knob on a stereo. In this mode, the Center Fre-
quency control selects the shelving frequency.
6. Low Band Select. Enables/Disables the Low Band and enables the Frequency, Gain, and Q for this
band.
7. L-Mid Band Select. Enables/Disables the Low-mid Band and enables the Frequency, Gain, and Q
for this band.
8. H-Mid Band Select. Enables/Disables the High-mid Band and enables the Frequency, Gain, and Q
for this band.
9. High Band Select. Enables/Disables the High Band and enables the Frequency, Gain, and Q for this
7.2.5 Equalizer 76