PRESONUS Revelator Dynamic Owner's Manual page 61

moment when the first reflections become audible.
Power User Tip: Imagine you're on a stage in a large music hall. You stand on the very edge of the
stage and shout "Hello world!" toward the center of the hall. There will be a brief pause before you hear
the first noticeable reflections of your voice, because the sound waves can travel much further before
encountering a surface and bouncing back. Adjusting the pre-delay parameter on a reverb allows you to
change the apparent size of the room without having to change the overall Size. This will give your mix a
little more transparency by leaving some space between the original sound and its reverb.
5. Amount. This is the "send" level to the Reverb from your mixer channels. Increasing this level will
increase how processed, or "wet," the Microphone Channel will sound.
5.2 Reverb 61