Panasonic AG-RT850P Service Manual page 11

3. CHECKING OF
MAIN C.B.A.
When Servicing the MAIN C.B.A, take out the MAIN
C.B.A. and mechanism from the frame and turn over,
and then connect Extension Cable (VFK2744) between
the POWER C.B.A. connector and the MAIN C.B.A.
connector as shown in below.
4. REMOVAL OF
CASSETTE TAPE
There are 2 ways to remove a cassette tape.
4-1. Removal of compulsory loading.
1) Press FF and EJECT buttons simultaneously
and set the service mode 7.
2) Press STOP button in order to unload the
mechanism
(Pay an attention to tape slack)
Service Mode Indication:
7 ※ ※ ※ ※ (STOP) → 7 00 ※ ※
(EJECT)
4-2. Removal of manual operation of
Main cam gear.
1) Disconnect the AC power cord and remove Top
Panel.
2) Rotate Main cam gear clockwise and unload the
mechanism (Tape as remaining)
3) Rotate the Pole of Capstan motor to the
clockwise the from the bottom in order to remove
the tape slack.
4) Rotate Main cam gear clockwise in order to eject
the cassette tape.
5. HOUR METER RESET
1. Turn OFF power.
2. Connect the jumper wire between TP6902 and
TP6901 on the Rear Jack C.B.A.
3. Set the MENU/REC LOCK switch to REC LOCK
side.
4. Pressing the TRACKING
- buttons simultaneously, then turn ON power.
5. Confirm the Time display starts to blink.
6. The hour meter reset function is completed when
stop the display blinking.
INF-6
+ and TRACKING