Setting Ccr Setpoints; Fly Time; Dive Data Screens - Garmin DESCENT G1 Series Owner's Manual

Setting CCR Setpoints

You can configure the high and low partial pressure of oxygen (PO2) setpoints for closed-circuit rebreather
(CCR) dives.
1 Hold MENU.
2 Select Dive Setup > CCR Setpoints.
3 Select an option:
• To configure the lower PO2 setpoint, select Low Setpoint.
• To configure the upper PO2 setpoint, select High Setpoint.
4 Select Mode.
5 Select an option:
• To automatically change the setpoint based on your current depth, select Auto.
NOTE: For example, if you descend through the high setpoint depth or ascend through the low setpoint
depth, the PO2 threshold switches to the high or low setpoint, respectively. Automatic setpoint depths
must be at least 6.1 m (20 ft.) apart.
• To manually change setpoints during a dive, select Manual.
NOTE: If you manually change setpoints within 1.8 m (6 ft.) of an automatic switch depth, then automatic
setpoint switching is disabled until you are more than 1.8 m (6 ft.) above or below the automatic switch
depth. This prevents unintended setpoint switching.
6 Select PO2, and enter a value.
7 If necessary, select Depth, and enter a depth value for the automatic setpoint change.
No-Fly Time
After a dive, you may need to wait several hours before it is safe to fly on an airplane. To indicate your remaining
no-fly time, appears on the default watch face. You can view more details on the surface interval glance
(Viewing the Surface Interval Glance, page
Hold MENU, and select Dive Setup > No-Fly Time.
No-Fly Time Mode
Standard or 24 Hours
Standard
Standard
Standard
24 Hours
Standard or 24 Hours

Dive Data Screens

You can press DOWN or double-tap the device to scroll through the data screens.
In the activity settings, you can reorder the default data screens, add a dive stopwatch, and add custom data
screens (Customizing the Data Screens, page
screens.
8
18).
Dive Type
Dive duration of 3 minutes or less or depth of 5 m (15 ft.) or less.
Non-decompression dive more than 48 hours since the previous dive.
Multiple non-decompression dives within 48 hours.
Dive with a completed decompression stop.
Non-gauge dive that did not violate the decompression plan.
Gauge dive or a dive that violated the decompression plan.
37). You can customize the data fields on some of the data
No-Fly Time
0 hours
12 hours
18 hours
24 hours
24 hours
48 hours
Diving