Sony ILCE-6400 Service Manual page 75

: guide line
• SY base block
trans insulating sheet
0 to 0.5 mm
0 to 0.5 mm
0 to 1.0 mm
– Front view –
sheet EM shield BN
tape AS 1/2
0 to 0.5 mm
Fold.
± 0.5 mm
0 to 0.5 mm
soft gasket (0.5
0 to 0.5 mm
• shoe block assy
sheet
shoe WP
– Top view –
0 to 0 to
0.3 mm 0.3 mm
0 to 0.3 mm 0 to 0.3 mm
sheet
shoe WP
– Rear view –
0 to
0 to
0.3 mm
0.3 mm
0 to 0.3 mm 0 to 0.3 mm
– Top view –
shoe sheet (WP)
0 to 1.0 mm
MDV-2000 flexible board
3 (18))
– Rear view –
0 to 0.5 mm
0 to 0.5 mm
sheet plate
shoe WP
– Bottom view –
– Front view –
Push it into the gap.
Fold.
• VF block
heat sheet (EV)
– Front view –
• SY heat sink
Align the positions of the two holes.
Note: Be careful not to cover the red frame area.
protection sheet (LC)
0 to 0.5 mm
0 to 0.3 mm
Fold.
Note: Make sure there are no wrinkles
or kinks in the shoe sheet (WP).
2-70
ILCE-6400/6400L/6400M
0 to 1.0 mm
0 to 1.0 mm
EYE sensor cushion
– Rear view –
insulating sheet (A)
– Front view –
SY WP sheet (upper)
0 to 1.0 mm
0 to 1.0 mm
– Rear view –
rear side
Continued on next page.
SYS SET