Sony ILCE-6400 Service Manual page 42

2-3-9. IM IMAGER UNIT
3 adjust IM washer (B)
Note 1: Install exactly as recorded during disassembly.
Note 2: Be careful of the direction of installation.
8 IM heat sink
– Front view –
qs screw (M1.7 5)
qd screw (M1.7
rear side
qa screw (M1.7
4 two bosses
: guide line
9 IM radiation sheet
5)
0 Align the four holes with
5)
1 adjust IM washer (A)
Note 1: Install exactly as recorded during disassembly.
Note 2: Be careful of the direction of installation.
2 two bosses
– Rear view –
5 adjust IM washer (C)
Note 1: Install exactly as recorded during disassembly.
Note 2: Be careful of the direction of installation.
boss A
boss B
7 Align the three holes with
the boss A, C, D and E
to install the IM heat sink block.
2-37
ILCE-6400/6400L/6400M
6 two bosses
top side
boss D
boss C
boss E
the boss A, B and C to
SYS SET