2-3-27. LC-1042 FLEXIBLE BOARD
1 LC-1042 flexible board
3 Crease the LC-1042 flexible board.
: Mountain fold
: Valley fold
– Rear view –
: guide line
8 Align the two holes with
the two bosses to paste
the LC-1042 flexible board
to the LC hinge assy.
: guide line
+ 1.0 mm
Note: Do not touch the red frame part.
9 hook
0 Align the two holes with
the two bosses to paste
the sensor part of the
LC-1042 flexible board
to the LC hinge assy.
– Rear view –
7 Peel off the
release paper.
7 Peel off the
2 sheet EM shield LC FPC
+ 0.5 mm
LC-1042 flexible board
6 Align the two holes to paste the MR sensor
fixed tape to the LC hinge assy.
5 Align the two holes to paste the FPC
release paper.
case fixed tape to the LC hinge assy.
2-53
ILCE-6400/6400L/6400M
LC hinge assy
4 LC hinge assy
SYS SET