Sony ILCE-6400 Service Manual page 68

2-3-37. REAR BUTTON FRAME BLOCK
5 rear button frame block
9 tapping screw (1.7 4)
(0.12 ± 0.02 N•m)
7 Install the rib to the ditch.
1 cabinet rear block
8 claw
front side
0 Install the RS-1013 flexible board to two boss positions.
Note 2: Take care not to damage the chip parts.
6 Install the rear button frame block to six boss positions.
Note 1: Take care so that the flexible board is not pinched.
– Front view –
2-63
4 Set the "AF/MF"
top side
qa Paste the RS-1013 flexible
ILCE-6400/6400L/6400M
2 Paste the sheet (upper)
to two boss positions.
3 Paste the sheet (lower)
to two boss positions.
board to four boss positions.
Note 2: Take care not to
damage the chip parts.
SYS SET