Reversing The Freezer Compartment Door - Zanussi ZXAN9FW0 User Manual

11. Set the door into its new place, making sure
the pin enters the bushing at the lower frame
section.
12. Secure the upper hinge. Make sure the pin
enters the bushing at the upper frame section.
13. Secure the lower hinge and do not tighten the
bolts until the door is in the closed position and
levelled.
14. Fix the decoration cover on the opposite side.
15. Close the door and tighten both of the hinges.
16. Place the top cover on the appliance and
tighten the screws on the back.
Install the door equipment.
Wait at least 4 hours before connecting the
appliance to the power supply.
REVERSING THE FREEZER COMPARTMENT
DOOR
WARNING! Before carrying out any
operations, remove the plug from the
power socket.
1. Close the freezer compartment door. Unscrew
the screw of the installation button. Place the
installation button and the screw in a safe
8
place.
2. Open a freezer compartment door slightly. Pull
down the freezer compartment door and the
cap from the door upper bearing.
3. Remove the installation buckle and install it on
the opposite side.
4. Reverse the freezer compartment door by 180
degrees. Install the cap on the door upper