Reversing The Freezer Compartment Door - Zanussi ZEAN11FW0 User Manual

9. Install the pin in the opposite hole of the hinge.
10. Screw the bottom hinge on the other side of
the appliance.
11. Install the rubber support on the side with no
hinge.
12. Fit the door on the lower hinge making sure the
hinge pin enters the door bottom hole.
13. Install the upper hinge on the opposite side of
the appliance. Fit the upper hinge pin into the
door upper hole. Tighten the screws.
14. Screw the remaining 2 screws on the top side
of the appliance with no hinge.
15. Place the top cover on the appliance and
tighten the screws on the back.
Install the door equipment.
8
Wait at least 4 hours before connecting the
appliance to the power supply.
REVERSING THE FREEZER COMPARTMENT
DOOR
WARNING! Before carrying out any
operations, remove the plug from the
power socket.
1. Close the freezer compartment door. Unscrew
the screw of the installation button. Place the
installation button and the screw in a safe
place.
2. Open a freezer compartment door slightly. Pull
down the freezer compartment door and the
cap from the door upper bearing.