Reversing The Freezer Compartment Door - Zanussi ZEAN11EW0 User Manual

Wait at least 4 hours before connecting the
appliance to the power supply.
REVERSING THE FREEZER COMPARTMENT
DOOR
WARNING! Before carrying out any
operations, remove the plug from the
power socket.
1. Close the freezer compartment door. Unscrew
the screw of the installation button. Place the
installation button and the screw in a safe
place.
2. Open a freezer compartment door slightly. Pull
down the freezer compartment door and the
cap from the door upper bearing.
66
3. Remove the installation buckle and install it on
the opposite side.
4. Reverse the freezer compartment door by 180
degrees. Install the cap on the door upper
bearing.
5. Fit the freezer compartment door and close
them.
6. Fix the installation button to the door lower
bearing. Press the installation button until there
is no gap between it and cavity, then fix the
screw.
7. Take out hole covers from a bag and put them
in the holes left after the door hinge.