Leica Visoflex 2 (Evf); Lcd Panel/Evf Use - Leica M11 Instruction Manual

LEICA VISOFLEX 2 (EVF)*

An electronic viewfinder (EVF) can be attached to the Leica M11 via
its accessory shoe. Leica Visoflex 2* is an optional extra and offers
the following functions:
– Swivel function for easy photography with various angles
– Applying screen settings
– Diopter compensation
Important
All mentions of "EVF" or "Electronic Viewfinder" in this manual
refer to the optional accessory Leica Visoflex 2.
Use of the older "Leica Visoflex" model with the Leica M11 can
– as a worst case scenario – result in irreparable damage to the
camera and/or the Visoflex. Please contact Leica Customer Care
if in doubt.
The settings described below will only take effect if Leica Visoflex is
attached.
* Visoflex was developed specifically for the M10 series, and is not compatible
with Leica M11. The newly developed Visoflex 2, on the other hand, can also be
used with older Leica M series models.
68
CAMERA BASIC SETTINGS ▸ LCD PANEL/VIEWFINDER SETTINGS

LCD PANEL/EVF USE

The electric viewfinder can take on a variety screen of functions. The
displays appearing on screen and in the electronic viewfinder are
identical.
You can preset the types of situations in which the EVF or the LCD
panel should show the displays.
Factory setting:
Auto
EVF
Auto
The eye sensor in the Visoflex automatically toggles
the camera between LCD panel and EVF.
LCD
EVF
• Shooting
• Review
• Menu control
EVF ex-
Only EVF is used for shooting mode. The eye sensor
tended
in the Visoflex automatically toggles the camera
between LCD panel and EVF for review and menu
control.
• Shooting
LCD panel
• Shooting
• Review
• Menu control
• Shooting
• Review
• Menu control
• Review
• Menu control