Download
Share
Print this page
Fein KBE 50-2 Manual
  1. Manuals
  2. Brands
  3. Fein Manuals
  4. Industrial Equipment
  5. KBE 50-2
  6. Manual
Fein KBE 50-2 Manual

Fein KBE 50-2 Manual

Hide thumbs Also See for KBE 50-2:

Advertisement

Quick Links

Download this manual

Advertisement

loading
Need help?

Need help?

Do you have a question about the KBE 50-2 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Fein KBE 50-2

Summary of Contents for Fein KBE 50-2

  • Page 2: Technical Data

    All the technical data can be found in the operating instructions for the model. Tests Up-to-date test data and test instructions after repair can be found on the FEIN Extranet (Customer Service → Repair Guides). Lubricants / Auxiliary substances The lubricants or auxiliary substances and their container sizes available from FEIN can be found on the FEIN Extranet (Customer Service →...

  • Page 3: Notes And Requirements

    Outside Germany, the regulations applicable in the relevant country must be observed. C-SC_CSSM Version 1.0 2017-05-02 All rights reserved by FEIN, especially in case of property rights applications. Page 1 of 1 FEIN retains all rights of disposal, such as copying and circulation...
  • Page 4 Grease 0 401 18 0300 9 120 g gearbox C-SC_CSSM Version 1.0 2017-05-02 All rights reserved by FEIN, especially in case of industrial rights registration. Page 1 of 1 FEIN retains all rights of disposal, such as copying and circulation...
  • Page 5 KBE 50-2 Troubleshooting Not yet available. C-SC_CSSM Version 1.0 2017-05-02 All rights reserved by FEIN, especially in case of property rights applications. Page 1 of 1 FEIN retains all rights of disposal, such as copying and circulation...
  • Page 6 1. Remove the hose (1) from the hose socket. 2. Remove the container (2). C-SC_CSSM Version 1.0 2016-05-20 All rights reserved by FEIN, especially in case of property rights applications. Page 1 of 9 FEIN retains all rights of disposal, such as copying and circulation...
  • Page 7 6. Remove the upper part of the cover (6). 7. Remove the two strands (7). C-SC_CSSM Version 1.0 2016-05-20 All rights reserved by FEIN, especially in case of property rights applications. Page 2 of 9 FEIN retains all rights of disposal, such as copying and circulation...
  • Page 8 4. Slide the drill motor (3) out of the guide. C-SC_CSSM Version 1.0 2016-05-20 All rights reserved by FEIN, especially in case of property rights applications. Page 3 of 9 FEIN retains all rights of disposal, such as copying and circulation...
  • Page 9 4. Remove the carbon brush holder (4). 5. Remove the cable (5). C-SC_CSSM Version 1.0 2016-05-20 All rights reserved by FEIN, especially in case of property rights applications. Page 4 of 9 FEIN retains all rights of disposal, such as copying and circulation...
  • Page 10 2. Remove the motor (2). - Socket head wrench, 5 mm C-SC_CSSM Version 1.0 2016-05-20 All rights reserved by FEIN, especially in case of property rights applications. Page 5 of 9 FEIN retains all rights of disposal, such as copying and circulation...
  • Page 11 7 mm diameter - Slide hammer - Inner puller C-SC_CSSM Version 1.0 2016-05-20 All rights reserved by FEIN, especially in case of property rights applications. Page 6 of 9 FEIN retains all rights of disposal, such as copying and circulation...
  • Page 12 - Slotted screwdriver 3. Remove the stator (3). - Plastic hammer C-SC_CSSM Version 1.0 2016-05-20 All rights reserved by FEIN, especially in case of property rights applications. Page 7 of 9 FEIN retains all rights of disposal, such as copying and circulation...
  • Page 13 - Drawing-off socket cap - Chuck cone, 26 mm C-SC_CSSM Version 1.0 2016-05-20 All rights reserved by FEIN, especially in case of property rights applications. Page 8 of 9 FEIN retains all rights of disposal, such as copying and circulation...
  • Page 14 - Drawing-off socket cap - Chuck cone, 19 mm C-SC_CSSM Version 1.0 2016-05-20 All rights reserved by FEIN, especially in case of property rights applications. Page 9 of 9 FEIN retains all rights of disposal, such as copying and circulation...
  • Page 15 5. Remove the circlip (5). 6. Remove the rotary knob (6). C-SC_CSSM Version 1.0 2016-05-20 All rights reserved by FEIN, especially in case of property rights applications. Page 1 of 6 FEIN retains all rights of disposal, such as copying and circulation...
  • Page 16 5. Press out the shaft (5). 56 mm inner diameter 60 mm outer diameter C-SC_CSSM Version 1.0 2016-05-20 All rights reserved by FEIN, especially in case of property rights applications. Page 2 of 6 FEIN retains all rights of disposal, such as copying and circulation...
  • Page 17 - Socket wrench insert, 7 mm - Slotted screwdriver C-SC_CSSM Version 1.0 2016-05-20 All rights reserved by FEIN, especially in case of property rights applications. Page 3 of 6 FEIN retains all rights of disposal, such as copying and circulation...
  • Page 18 - Sleeve 36 mm inner diameter 55 mm outer diameter C-SC_CSSM Version 1.0 2016-05-20 All rights reserved by FEIN, especially in case of property rights applications. Page 4 of 6 FEIN retains all rights of disposal, such as copying and circulation...
  • Page 19 3. Remove the feather key (3). - Combination pliers C-SC_CSSM Version 1.0 2016-05-20 All rights reserved by FEIN, especially in case of property rights applications. Page 5 of 6 FEIN retains all rights of disposal, such as copying and circulation...
  • Page 20 - Sleeve 24 mm inner diameter 42 mm outer diameter C-SC_CSSM Version 1.0 2016-05-20 All rights reserved by FEIN, especially in case of property rights applications. Page 6 of 6 FEIN retains all rights of disposal, such as copying and circulation...
  • Page 21 6. Unscrew the screw (6). 7. Remove the cable clamping piece (7). C-SC_CSSM Version 1.0 2016-05-20 All rights reserved by FEIN, especially in case of property rights applications. Page 1 of 8 FEIN retains all rights of disposal, such as copying and circulation...
  • Page 22 8. Unscrew the two screws (9) and remove the electronics. C-SC_CSSM Version 1.0 2016-05-20 All rights reserved by FEIN, especially in case of property rights applications. Page 2 of 8 FEIN retains all rights of disposal, such as copying and circulation...
  • Page 23 - Socket head wrench, 5 mm - PH2 cross-head screwdriver C-SC_CSSM Version 1.0 2016-05-20 All rights reserved by FEIN, especially in case of property rights applications. Page 3 of 8 FEIN retains all rights of disposal, such as copying and circulation...
  • Page 24 3. Remove the circlip (3). 4. Pull out the connecting cable (4). C-SC_CSSM Version 1.0 2016-05-20 All rights reserved by FEIN, especially in case of property rights applications. Page 4 of 8 FEIN retains all rights of disposal, such as copying and circulation...
  • Page 25 4. Unscrew the screw (2). 5. Unscrew the flat headed screw (3). C-SC_CSSM Version 1.0 2016-05-20 All rights reserved by FEIN, especially in case of property rights applications. Page 5 of 8 FEIN retains all rights of disposal, such as copying and circulation...
  • Page 26 - Inner bearing puller, 18-22 mm - Slide hammer C-SC_CSSM Version 1.0 2016-05-20 All rights reserved by FEIN, especially in case of property rights applications. Page 6 of 8 FEIN retains all rights of disposal, such as copying and circulation...
  • Page 27 - Socket head wrench, 5 mm 3. Unscrew the three handles (3). C-SC_CSSM Version 1.0 2016-05-20 All rights reserved by FEIN, especially in case of property rights applications. Page 7 of 8 FEIN retains all rights of disposal, such as copying and circulation...
  • Page 28 2.5 mm; 3 mm 5. Remove the pressure piece (5). C-SC_CSSM Version 1.0 2016-05-20 All rights reserved by FEIN, especially in case of property rights applications. Page 8 of 8 FEIN retains all rights of disposal, such as copying and circulation...
  • Page 29 ±0.15 Nm 8. Screw in the screw (6) [1.1 Nm C-SC_CSSM Version 1.0 2016-05-20 All rights reserved by FEIN, especially in case of property rights applications. Page 1 of 10 FEIN retains all rights of disposal, such as copying and circulation...
  • Page 30 4. Position the disc (4). 5. Coat the shaft with grease. C-SC_CSSM Version 1.0 2016-05-20 All rights reserved by FEIN, especially in case of property rights applications. Page 2 of 10 FEIN retains all rights of disposal, such as copying and circulation...
  • Page 31 26 mm inner diameter 30 mm outer diameter - Circlip pliers C-SC_CSSM Version 1.0 2016-05-20 All rights reserved by FEIN, especially in case of property rights applications. Page 3 of 10 FEIN retains all rights of disposal, such as copying and circulation...
  • Page 32 6. Screw in the screw (4) with the disc [3.0 Nm C-SC_CSSM Version 1.0 2016-05-20 All rights reserved by FEIN, especially in case of property rights applications. Page 4 of 10 FEIN retains all rights of disposal, such as copying and circulation...
  • Page 33 - Circlip pliers 3. Fit the protective hose (3). C-SC_CSSM Version 1.0 2016-05-20 All rights reserved by FEIN, especially in case of property rights applications. Page 5 of 10 FEIN retains all rights of disposal, such as copying and circulation...
  • Page 34 - Torx T20 5. Screw in the screw (4) [1.5 Nm C-SC_CSSM Version 1.0 2016-05-20 All rights reserved by FEIN, especially in case of property rights applications. Page 6 of 10 FEIN retains all rights of disposal, such as copying and circulation...
  • Page 35 3. Connect the cable (3). 4. Connect the cable harness (4). C-SC_CSSM Version 1.0 2016-05-20 All rights reserved by FEIN, especially in case of property rights applications. Page 7 of 10 FEIN retains all rights of disposal, such as copying and circulation...
  • Page 36 ±0.1 Nm 7. Screw in the screw (7) [1.8 Nm C-SC_CSSM Version 1.0 2016-05-20 All rights reserved by FEIN, especially in case of property rights applications. Page 8 of 10 FEIN retains all rights of disposal, such as copying and circulation...
  • Page 37 5. Screw in the screw (4) [1.5 Nm 6. Fit the cover (5). C-SC_CSSM Version 1.0 2016-05-20 All rights reserved by FEIN, especially in case of property rights applications. Page 9 of 10 FEIN retains all rights of disposal, such as copying and circulation...
  • Page 38 9. Screw in the two screws “4x48” (9) [2.0 Nm C-SC_CSSM Version 1.0 2016-05-20 All rights reserved by FEIN, especially in case of property rights applications. Page 10 of 10 FEIN retains all rights of disposal, such as copying and circulation...
  • Page 39 3. Place the gear wheel (3) in the correct position. - Combination pliers 4. Fit the circlip (4). C-SC_CSSM Version 1.0 2016-05-20 All rights reserved by FEIN, especially in case of property rights applications. Page 1 of 8 FEIN retains all rights of disposal, such as copying and circulation...
  • Page 40 - Sleeve 24 mm inner diameter 42 mm outer diameter C-SC_CSSM Version 1.0 2016-05-20 All rights reserved by FEIN, especially in case of property rights applications. Page 2 of 8 FEIN retains all rights of disposal, such as copying and circulation...
  • Page 41 36 mm inner diameter 55 mm outer diameter - Circlip pliers C-SC_CSSM Version 1.0 2016-05-20 All rights reserved by FEIN, especially in case of property rights applications. Page 3 of 8 FEIN retains all rights of disposal, such as copying and circulation...
  • Page 42 - Sleeve 12 mm inner diameter 27 mm outer diameter C-SC_CSSM Version 1.0 2016-05-20 All rights reserved by FEIN, especially in case of property rights applications. Page 4 of 8 FEIN retains all rights of disposal, such as copying and circulation...
  • Page 43 5. Fit the circlip (5). 56 mm inner diameter 60 mm outer diameter C-SC_CSSM Version 1.0 2016-05-20 All rights reserved by FEIN, especially in case of property rights applications. Page 5 of 8 FEIN retains all rights of disposal, such as copying and circulation...
  • Page 44 3. Insert the rotary knob (2). 4. Fit the circlip (3). C-SC_CSSM Version 1.0 2016-05-20 All rights reserved by FEIN, especially in case of property rights applications. Page 6 of 8 FEIN retains all rights of disposal, such as copying and circulation...
  • Page 45 4. Position the seal (4).  Replace the seal before each fitting. C-SC_CSSM Version 1.0 2016-05-20 All rights reserved by FEIN, especially in case of property rights applications. Page 7 of 8 FEIN retains all rights of disposal, such as copying and circulation...
  • Page 46 - Sleeve 12 mm inner diameter 31 mm outer diameter C-SC_CSSM Version 1.0 2016-05-20 All rights reserved by FEIN, especially in case of property rights applications. Page 8 of 8 FEIN retains all rights of disposal, such as copying and circulation...
  • Page 47 - Sleeve 7 mm inner diameter 26 mm outer diameter C-SC_CSSM Version 1.0 2016-05-20 All rights reserved by FEIN, especially in case of property rights applications. Page 1 of 11 FEIN retains all rights of disposal, such as copying and circulation...
  • Page 48 1. Position the sealing ring (1). 2. Position the bearing bush (2). C-SC_CSSM Version 1.0 2016-05-20 All rights reserved by FEIN, especially in case of property rights applications. Page 2 of 11 FEIN retains all rights of disposal, such as copying and circulation...
  • Page 49 - 4x round material, diameter 20 mm; length 60 mm C-SC_CSSM Version 1.0 2016-05-20 All rights reserved by FEIN, especially in case of property rights applications. Page 3 of 11 FEIN retains all rights of disposal, such as copying and circulation...
  • Page 50 15 mm inner diameter 30 mm outer diameter - Torx T20 C-SC_CSSM Version 1.0 2016-05-20 All rights reserved by FEIN, especially in case of property rights applications. Page 4 of 11 FEIN retains all rights of disposal, such as copying and circulation...
  • Page 51 2. Screw in the four screws (2) [8.0 Nm - Socket head wrench, 5 mm C-SC_CSSM Version 1.0 2016-05-20 All rights reserved by FEIN, especially in case of property rights applications. Page 5 of 11 FEIN retains all rights of disposal, such as copying and circulation...
  • Page 52 5. Place the spring (5) on the carbon brush. C-SC_CSSM Version 1.0 2016-05-20 All rights reserved by FEIN, especially in case of property rights applications. Page 6 of 11 FEIN retains all rights of disposal, such as copying and circulation...
  • Page 53 4. Screw in the flat headed screw (4) [1.2 Nm C-SC_CSSM Version 1.0 2016-05-20 All rights reserved by FEIN, especially in case of property rights applications. Page 7 of 11 FEIN retains all rights of disposal, such as copying and circulation...
  • Page 54 2. Connect the cable on the stator (2). - Circlip pliers 3. Route the cable (3). C-SC_CSSM Version 1.0 2016-05-20 All rights reserved by FEIN, especially in case of property rights applications. Page 8 of 11 FEIN retains all rights of disposal, such as copying and circulation...
  • Page 55 6. Screw in the two screws (6) [1.6 Nm C-SC_CSSM Version 1.0 2016-05-20 All rights reserved by FEIN, especially in case of property rights applications. Page 9 of 11 FEIN retains all rights of disposal, such as copying and circulation...
  • Page 56  At the places where the drill unit moves too fast or too slowly, screw the stud bolts in or out a little further. 2.5 mm C-SC_CSSM Version 1.0 2016-05-20 All rights reserved by FEIN, especially in case of property rights applications. Page 10 of 11 FEIN retains all rights of disposal, such as copying and circulation...
  • Page 57 2. Connect the hose to the hose socket (2). C-SC_CSSM Version 1.0 2016-05-20 All rights reserved by FEIN, especially in case of property rights applications. Page 11 of 11 FEIN retains all rights of disposal, such as copying and circulation...

  • Page 58: Connection Diagram

    KBE 50-2 Connection diagram C-SC_CSSM Version 1.0 2017-05-02 Alle Rechte bei FEIN, insbesondere für den Fall der Schutzrechtanmeldung. Seite 1 von 1 Jede Verfügungsbefugnis wie Kopieren und Weitergabe liegt bei FEIN...