Table of Contents
Advertisement
Description of Components
Subsystems (cont.)
Cooler Assembly
The cooler assembly is an
utilizes an electric fan that cycles on and off based on oil temperature to
ensure the temperature stays in the correct range.
Air Filter Assembly
The air filter assembly is the entrance for ambient air to the Boss 8060 UBI
PTO compressor system. Air is drawn through this assembly and into the
intake valve on the compressor assembly. The air filter assembly is a two
stage system that is capable of handling medium to high dust environ-
ments. The system incorporates an acoustical rain cap and corrosion
resistant housing. The air filter assembly also includes a service indicator
that shows the life of the filter even when the compressor system is off.
B-CAN Assembly and Harnesses
The B-CAN controller is the brain behind the Boss 8060 UBI PTO air
compressor system. The B-CAN is a compact, durable, and convenient
controller. It allows all system components, including a compressor,
generator, and hydraulic pump, to be controlled from one location with the
touch of a button. This controller receives feedback from the compressor
system to ensure proper performance. Utilizing the vehicle's on-board
Controller Area Network (CAN), the B-CAN communicates with the vehicle
and PTO compressor systems. Along with the B-CAN controller are simple
plug and play harnesses to greatly reduce installation time.
Hoses and Tubing
The 8060 UBI PTO compressor system is shipped with all the hoses and
tubing required for standard installations. The hoses and tubes are rated at
the pressures and temperatures required for safe operation. All hoses are
single wire braid hose with 37° JIC ends. The color and size differentiated
tubing uses push-on connections.
309743
D
aerodynamically designed cooling package that
C
B
A
18
4
3
4
3
2
2
Advertisement
Table of Contents
