2600-00CTEIGAA
Ver.
CHAPTER 2. Installation of RRH-P4
7) Remove the rain protection filler and the cable gland nut from the power cable input
hole located at the bottom of RRH-P4.
8) Insert the separated rain protection filler and the cable gland nut to the power cable
(Hybrid cable, AWG8, 2C).
9) Insert the power cable from the bottom of the equipment through the cable gland, then
install within the power window.
2-40
4.0
-48 V
Figure 2.30 Connecting RRH-P4 power cable (AWG8) (4)
Rain Protection Filler
Cable Gland Nut
RTN
Pressure Terminal
(Ring Type, Hole diameter: 0.2 in.)
Power Cable
(-48 V: Black, RTN: White/Black strip)
Cable Gland Body
External Power Cable Support Bracket
Power Cable
(Hybrid cable, AWG8, 2C)
Rain Protection Filler
Cable Gland Nut
© SAMSUNG Electronics Co., Ltd.