2600-00CTEIGAA
Ver.
Fixing Pressure Terminal (Hydraulic Press)
1) Among the dies of the hydraulic press, select one that fits to the pressure terminal.
2) Assemble the dies to the pressing area of the compressor.
3) Insert the pressure terminal into the pressing area and fix it slightly by aligning it to the end of cable
sheath.
© SAMSUNG Electronics Co., Ltd.
4.0
①
Figure E.8 Fixing Pressure Terminal_Hydraulic Press (1)
Smart MBS RRH-P4 Installation Manual/Ver.3.0
Dies
Hydraulic Press
②
E-11