Connecting Rrh-P4 Power Cable - Samsung Smart MBS RRH-P4 Installation Manual

2600-00CTEIGAA Ver.

2.8.3 Connecting RRH-P4 Power Cable

When using the power cable (AWG8)
Follow the steps below to connect the power cable to RRH-P4.
1) Unscrew the power window cover fixing screw located at the rear bottom of RRH-P4
using a Torx (T20) screwdriver. (The cover fixing screw is designed to remain attached
to the cover.)
© SAMSUNG Electronics Co., Ltd.
4.0
Figure 2.27 Connecting RRH-P4 power cable (AWG8) (1)
Smart MBS RRH-P4 Installation Manual/Ver.3.0
DC Power Window Cover
Cover Fixing Screw (T20)
2-37