Table of Contents
Advertisement
2600-00CTEIGAA
Ver.
ANNEX D.
D.1 Cleaning Optic Connector
When connecting optical cable to the system, performance of system can be decreased or
fails can occur if core section of optical connector is dirty due to dust or foreign material.
Therefore, worker should clean the optic connector before connecting optic cable to the
system to prevent this phenomenon.
This manual describes the method that cleans optic connector when using the IBC
cleaner.
Caution When Connecting Optical Cables
Before connecting an optical cable, make sure that there is no dust or foreign
substance on the cross-section of the connector core. If there is any dust or
foreign substance, do not remove it by blowing with your mouth. Remove the dust
or foreign substance by referring to the method of cleaning optic connector.
© SAMSUNG Electronics Co., Ltd.
4.0
Cleaning Optic Connector
Smart MBS RRH-P4 Installation Manual
TM
Brand
D-1
Advertisement
Table of Contents
