Leica BLK ARC User Manual page 20

Firmware update
mode
20
LED color
LED color
Lighting Instrument status
interval
pulsating The BLK ARC is in recording state.
1 blink Picture from the detail camera suc-
cessfully taken.
blinking The BLK ARC is in recording state
of a static scan.
blinking The BLK ARC is starting, initializing
or switching off.
pulsating The BLK ARC is in recording state
and something is notified or a
problem occurred.
1 blink An error occurred and the picture
from the detail camera was not
taken.
continuous Critical problem or major fail-
ure. Contact a Leica Geosystems
authorized service center for fur-
ther investigation.
Lighting Instrument status
interval
blinking The BLK ARC is running a firmware
update.
continuous The firmware update was success-
ful. The BLK ARC is in idle state.
continuous The firmware update failed.
Press and hold the button for
< 2 sec to bring the BLK ARC to the
idle state.
User Interface