Installation Instructions - American Standard Studio S 7105121 Owner's Manual

INSTALLATION INSTRUCTIONS

1
INSTALL FAUCET WITH OR WITHOUT DECK ESCUTCHEON
Turn off hot and cold water supplies
before beginning.
• Seat SEAL (1) into under side of FAUCET BASE (2).
• Feed FAUCET SUPPLIES (3), MOUNTING STUD (4)
through ESCUTCHEON (Optional) and the
mounting hole of lavatory or mounting surface.
• From below, push GASKET (7) and RETAINING
WASHER (5) onto MOUNTING STUD (4). Secure
Faucet with MOUNTING NUT (6), pulling faucet to
front of sink, so SUPPLIES (3) rests against
mounting hole.
• Adjust Faucet so that it is centered. Tighten
MOUNTING NUT (6) to complete faucet mounting.
A
Figure A
4
MOUNTING
SURFACE
Optional
Escutcheon
and Putty Plate
Figure B
4
7
5
6
2
1
3
5