Mounting & Installation - EPH Controls HRT Installation And Operation Manual

Mounting & Installation
Caution!
Installation and connection should only be carried out by a quali ed person.
ƒ
Only quali ed electricians or authorised service sta are permitted to open the
ƒ
thermostat.
If the thermostat is used in a way not speci ed by the manufacturer, its safety may be
ƒ
impaired.
Prior to setting the thermostat, it is necessary to complete all required settings
ƒ
described in this section.
Before commencing installation, the thermostat must be rst disconnected from the
ƒ
mains.
This thermostat can be mounted in the following ways:
1) Directly mounted on wall
2) To a recessed conduit box
EPH Controls Ltd.
7