Configuring The Printer For Your Network - Epson Stylus Pro 7800 Printer Manual

Configuring the Printer for Your Network

Once the printer is connected to your network, follow these steps to
configure it:
1. Turn on the printer and press the small black button on the back of the
card to make sure the configuration page prints.
2. Start the EpsonNet print server software.
The EpsonNet Config program searches for all Epson printers on the
network and displays the MAC address for each printer that it finds, for
example:
3. Highlight the printer that you want to configure and click
to access the TCP/IP selection screen.
Configuration
4. If necessary, contact your network administrator to assign an
appropriate IP address. A static address is recommended.
For more information, see the documentation that came with the print
server.
1-53
Setting Up the Printer | 53