Borderless Printing - Epson Stylus Pro 7800 Printer Manual

90 | Printing with Epson Drivers for Macintosh
Note: These settings
override settings made
through the control panel.
2. Choose one of the following
• Normal Cut
image.
extends the space between the images and trims each
• Double Cut
print individually. This provides the cleanest edge for borderless
printing.
causes the images to be printed end-to-end and saves
• Single Cut
paper. With borderless printing, you may see a sliver of the previous
or next image.
disables automatic cutting. Choose this setting if you want to
• Off
operate the cutter manually, print multiple print jobs without
cutting, or if you are printing on heavy media that must be cut by
hand.
See page 63 for instructions on using the
cutter. See page 57 for a list of media that are not recommended for
use with the built-in cutter.
3. Select either of the following options:
• Print Page Line
your pages.
• Save Roll Paper
the last page of your document. Available only when you've selected
Roll Paper (Banner)

Borderless Printing

For true borderless printing on roll paper, you can select either
or
Expand Retain Size
page 82. Your image may be clipped on the left and right edges, but you can
minimize clipping by sizing your image according to the page width and by
adjusting the length.
For either setting, you should add 0.1 inch to the length of your custom size.
3-90
Auto Cut
allows margin space at the top and bottom of each
prints trim lines on the right and bottom edges of
saves paper by not feeding the blank portion of
as the Paper Source.
and create a custom paper size, as described on
settings:
button to operate the
Auto