Epson Stylus Pro 7800 Printer Manual page 151

Message
COMMAND ERROR
CHECK DRIVER
SETTINGS
CONVERSION CRTG LIFE
CONVERSION CRTG
NEAR END OF SERVICE
LIFE
CONVERSION CRTG LIFE
REPLACE CONVERSION
CRTG WITH A NEW ONE
COVER OPEN
CLOSE COVER
F/W INSTALL ERROR
UPDATE FAILED
RESTART THE PRINTER
I/F CARD ERROR
CHECK CARD TYPE
INK CARTRIDGE ERROR
BK INK CHANGE
INK CARTRIDGE ERROR
CHECK CARTRIDGE
INK CARTRIDGE ERROR
INSTALL CORRECT
CARTRIDGE
Explanation
You may be using the wrong
printer driver.
Damaged data was sent to the
printer or the data has an
incorrect command.
The driver's ink type
configuration is not correct for
the ink in the printer.
The conversion cartridge will
need to be replaced soon.
(Remaining service life is
displayed on the LCD)
The conversion cartridge needs
to be replaced.
Front cover is open.
Firmware update failed.
Wrong interface card installed.
The black ink cartridge needs to
be changed.
You tried to install the wrong
ink cartridge.
The wrong black ink cartridge is
selected (Matte or Photo).
You tried to install an ink
cartridge that cannot be used
with this printer.
6-151
Solving Problems
Response
Press and hold the Pause button for
3 seconds to cancel the print job. Make sure
you installed the correct driver for your printer.
Press the Pause button to continue.
Replace the conversion cartridge with a new
one. Or, complete the replacement of black ink
by pressing the Pause button.
Close the front cover.
Restart the printer, then update the firmware
again; see page 50 for instructions.
Turn off the printer and remove the card. See
the documentation that came with the card.
Select YES to switch the black ink cartridge, or
NO to continue using the installed black ink
cartridge.
If you are replacing ink cartridges, check the
package and product code. You must use the
ink cartridges designed for your printer. Other
cartridges will not work.
Install the correct black ink cartridge, or press
the Pause button and change the ink setting;
see page 132.
If you are replacing ink cartridges, check the
package and product code. You must use the
ink cartridges designed for your printer. Other
cartridges will not work.
| 151