Epson Stylus Pro 7800 Printer Manual page 128

128 | Maintaining and Transporting the Printer
Caution: To ensure good
results, use genuine
Epson ink cartridges and
do not refill them. Other
products may cause
damage not covered by
Epson's warranty.
Caution: Leave the
empty cartridge in the
printer until you are ready
to replace it.
To prevent ink reporting
errors, never replace the
ink cartridges with the
printer turned off.
When the red B ink light is flashing (and
display), the indicated cartridge is almost out of ink. Make sure you have a
replacement cartridge. When the light stays on and
the cartridge is empty. You must replace the cartridge before you can
continue printing.
You can install any combination of 110 ml and 220 ml cartridges.
Use the following UltraChrome K3 Epson ink cartridges
Slot no. Cartridge
1 Light Light Black
2 Light Magenta
3 Light Cyan
4 Light Black
5 Photo Black
Matte Black
6 Cyan
7 Magenta
8 Yellow
You can purchase genuine Epson ink and paper from an authorized Epson
reseller. To find the nearest reseller, call 800-GO-EPSON (800-463-7766).
In the U.S., you can also purchase online at www.epsonstore.com. In
Canada, you can also purchase at www.epson.ca or 800-807-7766.
Before you start, make sure the printer is powered on. Then follow these
steps to replace an ink cartridge:
1. Note the color of the cartridge that is low or empty. This is the cartridge
you need to replace.
5-128
appears on the LCD
INK LOW
is displayed,
INK OUT
:
110 ml 220 ml
T562900 T563900
T562600 T563600
T562500 T563500
T562700 T563700
T562100 T563100
T566800 T567800
T562200 T563200
T562300 T563300
T562400 T563400