Table of Contents
Advertisement
6 Play videos from
storage devices
Using the projector, you can access and play
video files stored on a local storage device.
Notice
The projector supports a USB storage
device that is formatted for FAT16 or
FAT32 file system.
Supported file formats
The following file formats are supported:
.dat/.mpg/.mpeg/.ts/.trp/.tp/.vob/.mp4/.mkv/.
avi/.flv/.3gp
1
Connect a USB storage device to the USB
port on the projector.
•
Or insert a MicroSD card into the
MicroSD slot on the projector.
AV
MICRO SD
microSD
2
Go to the projector home screen by
pressing
on the projector remote control
and then select MOVIE.
Select USB to open the USB storage device
3
or TF to open the MicroSD card. Note: Only
supported video files are displayed on the
screen. All folders and files are ordered
alphabetically by name.
4
Press the navigation buttons on the
projector remote control to select a video
file or a folder. To open a selected folder,
press the OK button. To return to the parent
folder, select Up Folder on the screen. To
exit the current folder and storage device,
press
on the remote control or select
RETURN on the screen. If you select a
video file and wait more than 3 seconds,
the projector will begin playing a preview of
the video from the beginning.
Press the OK button or
5
control to start playing a selected video file.
Play videos from storage devices
HDMI 1
HDMI 2
USB
DC
on the remote
6
During video playback, press
remote control to start, pause or resume
playback. Press
control to skip to the previous/next video
file in the current folder.
While a video file is playing, you can press
the OK button on the remote control to
bring up the control bar at the bottom of
the screen. To instantly hide the control bar,
press
or
.
While the control bar is visible, press /
on the remote control to select an option
and then press OK to confirm the action or
change the value. To close the dialog box of
an option, press
The following options are available on the
control bar:
•
Play/Pause: Plays or pauses the video.
FB: Rewinds the video quickly. The
•
rewinding speeds range from 2X to 32X.
When you move to the point you want,
press
to start playing at normal
speed.
•
FF: Fast-forwards the video. The
forward speeds range from 2X to 32X.
When you move to the point you want,
press
to start playing at normal
speed.
•
Prev�: Skips to the previous video in the
current folder.
Next: Skips to the next video in the
•
current folder.
•
Stop: Stops playing the video and
returns to the list of video files in the
current folder.
•
Repeat: Toggles between the repeat
options. If Repeat None is selected, the
projector will stop playing videos after
the last video file in the current folder
has been played. If Repeat 1 is selected,
the projector will play the current video
continuously. If Repeat ALL is selected,
the projector will cycle through all
the video files in the current folder
continuously.
Set A/Set B/None: Use this option to
•
loop a segment of the video. To set the
start point for the loop, press the OK
button when you see Set A. Then Set
B appears and you can press the OK
button again to set the end point of the
loop. After these 2 steps, the video will
start playing in this loop. To deactivate
the loop, press the OK button when you
on the
/
on the remote
.
15
Advertisement
Table of Contents
