The System Security And Anti-Virus Options - Epson Pollution Preventer User Manual

The System Security and Anti-Virus Options

W h e n y o u s e l e c t t h e S e c u r i t y a n d A n t i - V i r u s o p t i o n
from the Main Menu, you see the System Security and
Anti-Virus screen, which contains the options described below.
Entering or changing a password
You can define both User and Supervisor password levels for
this system. If the system will be used by more than one
person, you may want to set a Supervisor password for
yourself and a User password for others you don't want to
have complete access to the system. For instance, you may
want to restrict access to the diskette drives or the computer's
virus protection features.
If you enable the Password on boot option, you must enter
the Supervisor or User password each time you turn on the
system. If you do not enable this option but you have defined
passwords, you must enter the password each time you start
the SETUP program. If both a Supervisor and User password
are enabled, SETUP displays options for setting the User
password only for users who logged on with a user password.
To specify a User password, you must first specify a Supervisor
password. Follow these steps to enter or change a Supervisor
password:
1. Select the Set Supervisor Password option and press
Enter.
2. You see a Set Supervisor Password window. Type the
password you want to use, then press
a password of up to eight characters.
3. Type the same password a second time and press
You see a message that your changes have been saved.
Enter.
You can define
Setting Up your System
Enter.
1 - 1 5