Philips Avent Plus SCF373/11 User Manual page 26

English
26
Mains adapter rated output
Adapter type number
Power port
Operating conditions
Storage and transportation
conditions
Operating pressure
Net weight
External dimensions
Device classification
Materials
Service life
Mode of operation
Ingress protection
Electromagnetic compatibility - compliance information
This device has been tested and found to comply with IEC 60601-1-2:2014 Ed 4.0 for electromagnetic
compatibility (EMC) as Class B according to CISPR 11:2009. Tests levels are listed in the accompanying
tables. Only use this Philips Avent single/double electric breast pump Plus in combination with the
adapter supplied.
Emissions
RF emissions
CISPR 11
Single electric breast pump Double electric breast pump
5 V d.c. / 1.1 A
S009AHz050yyyy The letters "yyyy" represent the output current from
0100 (1000 mA) to 0180 (1800 mA), increments in steps of 100 mA. The
letter "z" denotes type of plug, it can be: U, V, B, S, C, A, D, K, T, I, E, F.
Micro-USB
Temperature: 5 °C to 40 °C (41 °F to 104 °F)
Relative humidity: 15 to 90 % (non-condensing)
Temperature: ‑25 °C to 70 °C (‑13 °F to 158 °F)
Relative humidity: up to 90 % (non-condensing)
700-1060 hPa (<3000 m altitude)
230 g
Motor unit: 145 mm x 95 mm x 45 mm (LxWxH)
Applicable classifications:
Degree of protection against electric shock:
- Class II ME equipment
- Type BF applied part
The breast pump and the adapter are specified as medical electrical
system according to IEC 60601-1.
ABS, silicone (motor unit)
Polypropylene, silicone (other parts)
500 hours
Continuous operation
IP22 (motor unit), IP20 (adapter)
Compliance
Group 1
5 V d.c. / 1.8 A
310 g
Electromagnetic environment –
guidance
The device does not use RF energy for its
intended function. Therefore, its RF emissions
are very low and are not likely to cause any
interference in nearby electronic equipment.