Attach Wheels; Attach Handle - U-Line Magliner H-2661 Manual

Figure 4
Figure 5
PAGE 3 OF 9
ASSEMBLY CONTINUED

ATTACH WHEELS

1. Slide a thick washer onto each end of the axle. Slide
a wheel onto each end of the axle. Slide a thin
washer on each end of the axle. (See Figure 4)
2. Insert a cotter pin through the holes in each end
of the axle. Bend cotter pins using pliers to secure
wheels. Wheels should spin freely. (See Figure 4)

ATTACH HANDLE

1. Slide handle into the top rails of frame. Align holes
in handle and frame. Insert four 1/4"-20 x 1⁄" - pan
head bolts through the frame and handle and
secure with four 1/4" locknuts. (See Figure 5)
2. Tighten all locknuts.
1-800-295-5510
uline.com
0521 IH-2661