Programmed Cd Playback - Emerson MS9923TT Owner's Manual

PROGRAMMED CD PLAYBACK

You can program the CD changer to play up to a total of 40 tracks on all 5 discs in
any desired order.
NOTE: You can not program the CD changer during playback. If a disc is playing
press the STOP button first and then follow the instructions.
Entering A Program
• Press the "MEMORY" button once.
The MEMORY, the track number
indicators will flash in the display.
• Press the "CD/DISC SKIP" button or
one of the five disc buttons to select
the disc which contains the first track
you wish to program.
Example: Disc 2.
• Press the or
to select the first track you wish to
program.
Example: Track 8.
• Press the "MEMORY" button again
to store the desired disc and track
num ber into m em or y location
Number 1. The display will change
from Program Number 01 to Program
Number 02.
• Use the "CD/DISC SKIP" button or
one of the five disc buttons to select
the disc containing the next track you
wish to program.
Example: Disc 3.
• Press the or
to select the next track you wish to
program.
Example: Track 18.
• Press the "MEMORY" button again
to store the desired disc and track into
memory location Number 02.
Repeat the above procedure until you have stored up to 40 tracks in the program
memory and "FULL" appears in Display.
MS9923TT_ib_0416.p65
Track Skip buttons s
Track Skip buttons s
13
13 16/4/2002, 14:17