Listening To The Radio - Emerson PD6537 Owner's Manual

OPERATING INSTRUCTIONS

LISTENING TO THE RADIO

1.) Move the FUNCTION selector to the RADIO position.
2.) Move the BAND selector to the desired band, FM STEREO, FM or AM.
3.) Tune to your desired station with the TUNING control. If you have set the BAND
selector to FM STEREO and you tune to a FM Stereo station the FM STEREO
LED Indicator will light.
4.) Set the VOLUME control to the desired level.
5.) When you are finished listening move the FUNCTION selector back to the
TAPE (POWER OFF) position to shut the power ' Off' and extend the battery
life.
Antenna Information
AM
The AM antenna is inside the
cabinet. IF AM reception is
unsatisfactory try rotating the
entire unit until you find the
position that provides the best reception.
FM
Vary the direction of the FM antenna to
find the position that provides the best
reception.
NOTE: If you are listening to a weak FM Stereo station you can usually improve
the reception by moving the BAND selector from the FM STEREO position to the
FM position, however the sound will now be mono.
PD6537_ib011303.p65
8
8 13/1/2003, 14:48