Listening To The Radio - Emerson PD9814 Owner's Manual

OPERATING INSTRUCTIONS

Listening To The Radio

Tuner Information
This system features a normal AM/FM analog tuning system. Unlike a digital tuner
it does not automatically lock in on the exact frequency of a station. However
instead of a dial scale and a moving dial pointer we have included a digital frequency
display to help you tune more accurately.
Do not be concerned if you cannot easily tune the display to the exact frequency of
your favorite stations, especially on the AM band. Slowly rotate the TUNING control
until the display approaches the frequency of the desired station and stop when
get the strongest, noise free reception - even if the display is not indicating the
exact frequency of desired station.
1.) Slide the FUNCTION (CD/TAPE-OFF/RADIO) Selector to RADIO position.
The LCD display light comes ' On' .
Select the desired band – AM, FM, or FM ST – by sliding the BAND selector.
2.) Rotate the TUNING control until the exact frequency of
the desired station appears on the display, or until you
are receiving the strongest, clearest signal.
If you have set the BAND selector to FM ST and you tune
to a FM Stereo station the FM ST LED Indicator will light.
Note: If you are listening to a weak FM Stereo station
you can usually improve the reception by moving the
BAND selector from the FM ST position to the FM
position, however the sound will now be mono.
3.) Adjust the VOLUME control to your listening preference.
4.) If you prefer more bass, press the BASS BOOST button to ' On' position.
5.) To turn off the radio, slide the CD/TAPE-OFF/RADIO switch to TAPE-OFF
position to shut power ' Off' . The LCD display light goes ' Off' .
PD9814_053105.p65
10
10
FM ST
31/5/2005, 10:31