Returning Your System To Its Factory Condition - Acer EL1300 User Manual

Returning your system to its factory
condition
In case your computer experiences problems that are
not recoverable by other methods, you may need to
reinstall everything to return your system to its factory
condition. You can reinstall using either your hard
drive or the recovery discs you have created.
then reinstalls Windows and all software and drivers that were
pre-installed on your system. If you can access important files on
your hard drive, back them up now.
•
•
•
Recovering from within Windows OS
To reinstall Windows OS and all pre-installed
software and drivers:
1
2
3
50
Chapter 3: Troubleshooting
Caution
This complete recovery deletes everything on your hard drive,
If you can still run Windows OS, see
from within Windows OS" on page
If you cannot run Windows OS and your original
hard drive is still working, see
the hard drive during startup" on page
If you cannot run Windows OS and your original
hard drive has been completely re-formatted or
you have installed a replacement hard drive, see
"Recovering from your recovery discs" on
page 51.
Click (Start), All Programs, eMachines, then click
eMachines Recovery Management.
Recovery Management
Click the Restore tab, then click Restore system to
factory default. The
opens.
Click Yes, then click Start. A dialog box displays
information about the hard drive that the
operating system will be recovered to.
Caution
Continuing the process will erase all files on your hard
drive.
"Recovering from
eMachines
opens.
Confirm Restoration
"Recovering
50.
51.
dialog box