Eiki LC-XT4U/E Owner's Instruction Manual page 13

INPUT/OUTPUT TERMINALS AND JACKS
INPUT 2
5 BNC INPUT JACKS
Connect component video output (Cr, Y,
Cb or Pr, Y, Pb) from video equipment to
R/Pr, G/Y and B/Pb jacks or connect
computer output [5 BNC Type (Red,
Green, Blue, Horiz. Sync and Vert.
Sync.)] from computer to R/Pr, G/Y,
B/Pb, H/HV and V jacks. (Refer to P15,
16.)
SERIAL PORT IN
SERIAL PORT OUT
R/C JACK USB
AUDIO OUT
R L
RESET
(MONO)
INPUT 3
AV INPUT (VIDEO/Y, C) JACKS
Connect composite video output from
video equipment to VIDEO/Y jack or
connect Separate Y/C video outputs to
VIDEO/Y and C jacks. (Refer to P16.)
INPUT 1
DVI INPUT TERMINAL
Connect computer output
(Digital/Analog DVI-I type) to
this terminal.
(Refer to P15.)
HD (HDCP Compatible) signal
can also be connected.
(Refer to P16.)
DVI
R/Pr G/Y B/Pb H/HV V
S-VIDEO
C
VIDEO/Y
ANALOG RGB
INPUT 4
HDB 15-PIN INPUT TERMINAL
Connect computer output
(Analog HDB 15-pin type) to
this terminal.
(Refer to P15.)
CONNECTING PROJECTOR
INPUT 1, 2, 3, 4
AUDIO INPUT JACKS
Connect audio output
from computer or video
equipment to these jacks.
(Refer to P15, 16.)
AUDIO
CONTROL PORT
R L
(MONO)
AUDIO CONTROL PORT
R L
(MONO)
AUDIO
R
L
(MONO)
AUDIO CONTROL PORT
R
L
(MONO)
INPUT 3
S-VIDEO INPUT JACK
Connect S-VIDEO output
from video equipment to
this jack. (Refer to P16.)
INPUT 1, 2, 4
CONTROL PORT CONNECTORS
The port is not functioning
in this model.
13