Table of Contents
Advertisement
There are five sections on the Remote Control as described below.
LED indicator: The LED will light when the Remote Control is functioning. If not, please check
your batteries.
Section A: BLUE characters, for PROJECTOR use
1.
POWER: Powers On/Off the projector
2.
ZOOM-: Reduces the image size (For projecto r use)
3.
ZOOM+: Increases the image size (For projector use)
4.
MUTE: Mutes the audio output. Press once for Mute on ,press again for mute off.
5.
SLEEP: Turns off the projector after a period. (So the time you need---0ff, 15min, 30min, 45min,
60min)
6.
FREEZE: Freezes the image.
7.
SYNC: Optimizes the signal from PC
8.
SOURCE: Selects "Composite Video", "S-Video",
YPbPr", "DVD Player", "Media player", "Computer", "TV" sources.
9.
KEYSTONE: Adjusts image distortion caused by tilting the projector (+/- 12 degree)
10. ASPECT: Selects the aspect ratio.(4:3,16:9,1:1)
11. IMAGE MODE: Three modes can be selected. (Theater/Computer, Standard, User)
12. MENU: Displays the MENU of your playing device. Press once to display, twice to disappear.
Section B: RED characters, for MEDIA PLAYER use
13. PLAY and PAUSE:
PLAY: Plays program
PAUSE: Pauses the program.
When playing slideshow with music, press once to pause the slideshow, press again to pause the
MP3 music.
14. MUSIC SLIDE: Plays slideshow with music
15. PHOTO: Plays the photos
16. PREV/RW
PREV: Selects the previous photo
RW: Rewinds the program
17. STOP: Stops the program
18. SETUP: Enters the OSD of the Media player. (If you are playing a program, please stop it first).
19. ROTATE: Rotates the photo (This function can't be executed when playing a slideshow)
20. NEXT and FW:
NEXT: Selects the previous photo
FW: Forward the program
21. INFORMATION : Shows the information (resolution) of the displaying photo.
22. SELECT: a. Selects the card you want when different cards are inserted simultaneously.
b. Return to start-up screen.
Control Panel and Remote Control
"Component-I Video (YCbCr)", "Analog
Advertisement
Table of Contents
