Table of Contents
Advertisement
INSTALLATION
2-3-2-1
INSERTING AND REMOVING MEMORY CARDS
There is no need to turn off the power to insert or remove a memory card. As long as
you are not viewing files on the card being removed, memory cards can be inserted and
removed from the Media Player anytime.
1.
Open the "Media Player" Cover smoothly.(Drawing 17)
2.
Insert cards into the slots. (Drawing 18) (Different cards can be inserted
simultaneously.)
3.
Push cards gently until they stop. If a card does not insert easily, please check its
orientation.
4.
The projector will automatically detect the source when a card is inserted. If not,
please press the "Source" button on the Control Panel of the projector or on the
Remote Control to cause the projector to select the Media Player source.
5.
To remove a card, pull it out from the slot.
2-3-2-2 CONTROL PANEL ON THE PROJECTOR
Please refer to the section 3-1-1.
2-3-2-3
REMOTE CONTROL
Please refer to the section 3-1-2
2-3-2-4
START-UP SCREEN OF THE MEDIA PLAYER
When memory cards are inserted simultaneously, the card selection screen is displayed
as shown in Drawing 19.
1. Card selection
Press the "Up" or "Down" buttons on
the Control Panel or Remote Control to
choose the card you want to play.
Press "Enter" to select.
Once a card is selected, or if only one
card is inserted, the file selection
screen is displayed as shown in
Drawing 20.
DRAWING 19
Advertisement
Table of Contents
