Edimax ES-3124REM User Manual page 32

4.7.1 Port-based VLAN
Steps to create a new VLAN group based on port-based VLAN:
1.Click Add to create a new VLAN group.
2.Enter the VLAN name, group ID and select the members for
the new VLAN.
3.Click Apply.
4.If there are many groups that over the limit of one page, you
can click the "NextPage" to view other VLAN groups.
NOTE: If the trunk group exists, you can see it (ex: TRK1,
TRK2...) in select menu of ports, and you can configure it as the
member of the VLAN or not.
32