Digital Watchdog Megapix DWC-MB421TIR User Manual page 7

All manuals and user guides at all-guides.com
Reset
T-W Jog Button
Test Video Output
To pass cables through the wall/ceiling, drill holes on
the wall/ceiling.
Connect the network cable, power cable respectively.
See the section 'Installation - Cabling' for details.
Fix the camera on the wall/ceiling by screw provided.
Loosen the Pan/Tilt stoper screw a litte before fixing the camera.
By using the video test cable, check the screen during
installation. You can adjust the zoom ratio using the
T-W jog button.
SD Card Slot
WIDE
TELE
Press the reset button for 5 seconds to return the setup
to the factory default.
If you press the 'Reset' button, you will lose all setting
data. If needed, please, make a note for further
installation.
Zoom Out
Zoom In